Mesh Belt Drying Oven
Mesh Belt Drying Oven

Mesh Belt Drying Oven

RANRAN Mesh Belt Drying Oven delivers continuous drying for sheet-like, strip-shaped, granular and free-flowing ventilated materials. Built with SUS304 mesh conveyor belt and forced circulating hot-air system, it conveys materials through a fully insulated drying chamber for steady moisture removal. Continuous feeding, conveying and discharging support mass production with consistent drying output.
Send Inquiry

Mesh Belt Drying Oven Overview


RANRAN Mesh Belt Drying Oven delivers continuous drying for sheet-like, strip-shaped, granular and free-flowing ventilated materials.


Built with SUS304 mesh conveyor belt and forced circulating hot-air system, it conveys materials through a fully insulated drying chamber for steady moisture removal. Continuous feeding, conveying and discharging support mass production with consistent drying output.

 

Material Compatibility & Application Limitations


This dryer suits materials that spread evenly on the belt and accept forced hot-air drying, including flakes, slices, strips and free-flowing particulates.


Typical Industrial Applications
Food:
Dehydrated vegetables, fruit slices, spices, herbal tea, snack ingredients


Agriculture: Grains, seeds, nuts, crop by-products, plant raw materials


Pharmaceuticals: Chinese herbal slices, botanical extracts, pharmaceutical intermediates


Chemicals: Granular chemicals, catalyst carriers, mineral powders, heat-stable intermediates


Biomass & Feed: Biomass pellets, feed pellets, alfalfa, agricultural residues


Minerals & Industry: Ore granules, building material particles, dewatered filter cake

 

Material Type

Technical Considerations

Fine powders (<80 mesh)

Fine mesh + sealed containment to prevent leakage and dust escape

Sticky materials

Anti-stick Teflon coated belt, automatic scraper cleaning mechanism

High-moisture materials (≥70% initial moisture)

Restricted loading thickness, extended low-temperature pre-drying zone

Heat-sensitive materials

Zone temperature lock ±1℃, gentle low-speed cross airflow

Corrosive materials

SUS316L belt and chamber lining, anti-corrosion frame coating

Fragile materials

Low-drop feeding chute, buffer baffle to cut particle breakage

 

Evaluation Factor

Why It Matters

Initial Moisture Content

Defines total evaporation load and heating requirement

Target Moisture Content

Sets drying endpoint and required residence time

Particle Size and Shape

Affects spreading uniformity and airflow penetration

Material Layer Thickness

10–80 mm adjustable; impacts heat transfer and drying uniformity

Bulk Density

Determines belt loading and hourly throughput

Heat Sensitivity

Sets maximum working temperature to avoid degradation or active ingredient loss


Send material description, photos and moisture targets if you are unsure about compatibility. Our engineering team will review and propose a suitable drying scheme.

 

Continuous Drying Process


The dryer runs on continuous material transport plus regulated forced hot-air drying. Raw material spreads evenly onto the stainless steel mesh belt and travels through the insulated chamber. Circulating hot air penetrates the bed and carries away vaporized moisture. Belt speed and zone temperature settings jointly control residence time and final drying performance.


Four Main Stages of the Drying Process
Stage 1. Material Feeding

Wet material is distributed by an adjustable spreader, which helps level the feed across the full effective belt width.


Stage 2. Continuous Material Conveying
The mesh conveyor carries material through the chamber at variable speed, tuned to match the drying requirement.


Stage 3. Hot-Air Drying
Hot air circulates through or around the material layer for heat transfer and moisture removal. Airflow direction, temperature profile and section layout are customised per material and process.


Stage 4. Continuous Material Discharge
Finished material exits at the discharge end. The outlet can connect to cooling conveyors, sifters, collection bins or other downstream process units.

 

Main Technical Parameters

 

Technical Parameter

Standard Configuration

Equipment Type

Continuous Mesh Belt Drying Oven, DW series

Conveyor Belt Width

Standard models: 1200 / 1600 / 2000 / 2500 / 3000 mm

Effective Drying Length

Standard: 8 m /10 m /12 m /16 m /20 m; custom up to 30 m

Conveyor Structure

Single-layer / 2-layer / 3-layer multi-layer stacking design

Belt Speed

0.1–1 m/min, VFD stepless adjustable

Operating Temperature Range

40℃ ~ 220℃, multi-zone independent setting

Heating Method

Electric / Steam / Natural Gas / Heat Pump

Material Feeding Height

1000–1800 mm, customizable

Discharge Height

1000–1800 mm, customizable

Air Circulation System

Top-blowing / bottom-blowing / cross forced circulation

Temperature Control Precision

±1~±2℃, PID auto constant temperature, overheat alarm & interlock protection

Belt Material

SUS304 as standard; SUS316L optional for corrosive materials

Thermal Efficiency

76%–84% under rated working condition

Evaporation Capacity

50 kg/h ~ 4500 kg/h water removal, matched to model

Electrical Configuration

380V/50Hz standard; 415V/60Hz, 220V 3-phase custom

 

Airflow and Temperature Control


Different materials require rising, constant or falling temperature drying curves. The chamber is divided into 3–8 independent temperature zones, each fitted with dedicated heating elements, circulating fans and PID controllers for staged processing.


The forced circulation system includes air equalizing plates and adjustable dampers, configurable for upward, downward or cross airflow. Balanced air distribution reduces moisture variance between the centre and edge of the mesh belt.

 

Available Heating Options


Electric Heating: Suits stable power supply and low-to-medium evaporation loads, with SSR solid-state regulation.


Steam Heating: Preferred for sites with existing 0.4–0.8 MPa steam pipelines.


Gas Heating: Indirect combustion for high evaporation throughput, fitted with full safety interlock and flame detection.


Heat Pump Heating: Low-temperature drying below 70℃ for heat-sensitive food and herbal materials.

 

Production Line Integration


This dryer works standalone or as a core drying station within a continuous processing line.


Upstream Connections: Automatic feeding conveyor, material spreader, feeding hopper + vibratory feeder for stable feed control. Downstream Connections: Cooling conveyor, vibrating sorting sieve, cyclone collection system, automatic packaging unit.


When designing line integration, we assess feed/discharge height, transfer direction, hourly capacity, speed synchronisation with adjacent machines, workshop space & floor load, PLC interlock logic and maintenance access. We can customise layout and supply complete P&ID flow charts matched to your existing production setup.

 

Available Customization Options


Conveyor Belt: Width, length, mesh aperture, SUS304 / SUS316L / Teflon coating, single or multi-layer stacking


Chamber: Overall length, width, height, access doors, inspection windows


Heating: Electric, steam indirect, gas indirect, heat pump or mixed heating


Airflow: Circulation layout, plenum, fan power, exhaust damper control


Feed & Discharge: Hopper, automatic spreader, outlet conveyor, dust collection interface


Control System: Local voltage & frequency, HMI touchscreen, PLC recipe storage, remote signal interface, alarm logic

 

Engineering Design & Production Flow


Engineering Design Process: Material assessment → throughput & moisture requirement analysis → drying curve + airflow + heat load calculation → equipment configuration confirmation → final technical review of utilities, foundation drawing, space, supply boundary and acceptance criteria.


Every unit is built against approved drawings and BOM. We run full IQC → IPQC → FQC inspection following AQL 2.5 acceptance criteria for mechanical and electrical components.


Production workflow: Drawing review → incoming material inspection → frame fabrication → insulation & shell assembly → conveyor fitting → heating & duct installation → electrical wiring → 8-hour continuous pre-shipment running test.

 

Quality Inspection & Document Delivery


Standard inspection checklist:
Dimension & structural verification, heating insulation & leakage test, electrical safety test, full-load multi-zone temperature uniformity test, fan/conveyor/sealing functional test, alarm and interlock logic test.


Test reports, as-built drawings, operation manuals, CE declaration and factory inspection certificate are delivered with each machine.

 

Supply List & Optional Accessories


Standard supply: Drying chamber, SUS304 mesh belt conveyor, heating assembly, circulation fans, PLC+HMI control cabinet, temperature sensors, VFDs, safety interlock system


Optional: Feeding spreader, inlet/outlet conveyor, exhaust hood, waste heat recovery, remote monitoring module, spare parts kit, cyclone dust collector

 

Frequently Asked Questions

 

Q: What materials can a mesh belt drying oven process?

A: It handles slices, strips, granules and free-flowing particulates including food, herbal medicine, chemical, biomass and mineral materials. Sticky, ultra-fine powder or corrosive feed requires special structural customisation.

Q: How is the conveyor belt speed adjusted?

A: VFD stepless frequency control from 0.1–1 m/min, adjustable directly on the HMI panel to modify residence time.

Q: Can the equipment integrate into an existing production line?

A: Yes. We match feed/outlet elevation, transfer speed, control signals and interfaces to your upstream and downstream machinery.

Q: Can you customise equipment dimensions and electrical specs?

A: Belt width, drying length, layer count and electrical setup are fully customised to fit your workshop layout and power supply.

Q: What is the minimum order quantity (MOQ)?

A: MOQ is 1 set. All mesh belt dryers are manufactured to custom specifications.

Q: What is the manufacturing lead time?

A: Normally 30–45 working days after drawing confirmation; large multi-layer, gas or heat pump models require 45–60 working days.

Q: What warranty and technical support do you provide?

A: 12-month standard warranty for core structural, heating and electrical components, excluding consumables such as mesh belt and seals. We provide remote troubleshooting, operational guidance and spare parts consultation. Paid on-site service is available on request.

Q: Can you test our materials before order confirmation?

A: Material drying trials can be arranged. Send representative samples, material data and target moisture for feasibility assessment.

Q: Can you arrange international shipping and export documents?

A: Yes. We provide fumigated plywood export packaging, CI, PL, CO and CE documents. We operate under Incoterms EXW / FOB / CIF as requested.

Hot Tags: mesh belt drying oven, China mesh belt drying oven manufacturers, suppliers, factory, Automatic Vacuum Drying Oven, Explosion proof Industrial Oven, Grinding wheel curing furnace, Hot Air Circulation Drying Oven, Industrial Vacuum Oven, Wheel Curing Oven