Custom-built Electric Trolley Ovens for Industrial Drying, Curing, Preheating and Batch Thermal Processing
RRTC builds electric trolley ovens for large workpieces and heavy assemblies in batch production. The trolley loading system, electric heating package and hot air circulation layout deliver flexible, controllable heating for processes requiring easy material handling and stable thermal conditions. Our engineering team defines chamber geometry, trolley frame design, heating capacity and control scheme around your actual process.
Key Product Advantages
Heavy-duty trolley frame built to accommodate bulky, high-mass workpieces, with a standard payload range from 500 kg up to 10,000 kg
Electric heating package for precise industrial thermal processing, temperature stability within ±1°C at setpoint
Choice between natural convection or forced hot air circulation; forced circulation version achieves temperature uniformity of ±3~5°C across the full working zone
Bespoke chamber dimensions and trolley layout, supporting single or multi-layer stacking fixtures
Custom electrical wiring and PID temperature control packages, with data recording, alarm and remote monitoring options

Industrial Applications
Metal Parts Drying and Preheating
Removes residual water and cleaning chemicals from welded frames, castings, machined components and sheet metal after alkaline wash, phosphating and passivation prior to coating. It also provides uniform preheating and low-temperature stress relief for carbon steel, alloy steel and aluminium. Common uses: preheating for forming, post-machining dehumidification and hydro-test drying.
Automotive Parts Manufacturing
Processes chassis brackets, EV battery trays, motor housings, suspension parts and welded body subassemblies. Stable heating ensures even e-coat curing and avoids moisture-induced hidden corrosion. Suitable for electrophoretic coating, adhesive curing and post-weld stress relief of NEV structural components.
Powder Coating and Surface Treatment
Cures epoxy, polyester and hybrid powder coatings on fabricated metal, cast and aluminium parts at 180–200°C for 10–20 minutes. Ducted hot air circulation eliminates cold spots to prevent under-curing, orange peel and colour variation. It also supports flash-off and curing for liquid paint.
Machinery and Equipment Manufacturing
Accommodates bulky heavy weldments, machine bases, gearbox housings, bearing blocks and farm machinery assemblies. The heavy-duty rail trolley transports full loads smoothly into the chamber. Typical processes: 200–300°C post-weld stress relief, anti-rust oil baking, paint curing and pressure test drying.
Rubber and Plastic Processing
Used for thermal conditioning, secondary vulcanisation and drying of silicone, heat-resistant rubber, PEEK, PPS and fibre-reinforced polymers. Ideal for large rollers, sealing strips, composite sheets and high-temperature plastic structures.
Trolley Loading Configuration
The movable trolley is the core feature of this oven series. Operators stage and arrange workpieces on the trolley outside the hot chamber, then roll the fully loaded cart into the heated zone.
Customized Trolley Dimensions: Trolley length, width and loading height are sized around workpiece geometry and usable internal chamber space. Single-layer and multi-layer fixture frames are available.
Loading Platform Configuration: Support ribs and platform framing are engineered for your part shape, weight spread and fixture layout. Reinforced structural welding is adopted for heavy-load models.
Rail and Movement Arrangement: Rail layout, trolley track path and stop positions align with oven structure and existing workshop floor plan. Options include manual push type and motor-driven trolley.
Heating Performance and Temperature Uniformity
Two Optional Hot Air Circulation Schemes
Electric heating elements generate heat inside the insulated chamber. We select natural convection or forced hot air circulation according to workpiece dimensions and allowable process temperature deviation. Heater layout is custom-arranged to match target temperature, loading density and thermal field distribution.
Precise Thermal Load Calculation
Heating power is sized from real working conditions. Calculations factor in workpiece thermal mass, incoming temperature, setpoint, batch weight, ramp rate and heat loss via insulation, gaskets and openings. For heavy metal and dense loads, full-load thermal simulation validates the heater rating for consistent heat during ramp and soak.
Natural Convection
Suitable for drying and preheating processes with loose temperature tolerance. It delivers reliable operation and lower equipment investment.
Forced Hot Air Circulation
Equipped with circulation fans and precision engineered ductwork to deliver full hot air coverage across the loading zone. Airflow direction is customised according to workpiece placement and stacking method. Horizontal airflow and vertical airflow structures are available.
PID Temperature Control
PID closed-loop control holds steady set temperature. Sensors and electrical components are selected to match process parameters and on-site power conditions. Standard features include over-temperature protection, programmable timer and fault alarm output. Touchscreen HMI is optional.
Technical Specifications
Electric Trolley Oven Models and Technical Parameters
|
Parameter |
TC88-5 |
TC88-6 |
TC88-7 |
|
Chamber Size (W×D×H, mm) |
800×800×1200 |
1000×1200×1200 |
1800×1500×1700 |
|
Temperature Range |
RT+10~300°C / 500°C |
RT+10~300°C / 500°C |
RT+10~300°C / 500°C |
|
Heating Power (kW) |
12–18 |
18–25 |
28–35 |
|
Circulation Fan (kW) |
1.5 |
2.2 |
2.2/2 |
|
Fan Motor (kW) |
0.75 |
1.1 |
1.5 |
|
Max Payload (kg) |
500 |
1000 |
2000 |
|
Parameter |
TC88-8 |
TC88-9 |
TC88-F |
|
Chamber Size (W×D×H, mm) |
2000×1700×1700 |
3000×2000×1800 |
6000×2000×2500 |
|
Temperature Range |
RT+10~300°C / 500°C |
RT+10~300°C / 500°C |
RT+10~300°C / 500°C |
|
Heating Power (kW) |
35–45 |
45–58 |
65–90 |
|
Circulation Fan (kW) |
3/2 |
4/2 |
5/4 |
|
Fan Motor (kW) |
2.2–3 |
3–5 |
5.5 |
|
Max Payload (kg) |
3000 |
5000 |
10000 |
Additional Configuration Information
|
Item |
Configuration |
|
Heating Method |
Electric Heating |
|
Air Circulation |
Natural Convection or Forced Hot Air Circulation |
|
Loading Method |
Movable Trolley (Manual / Motor-driven optional) |
|
Chamber Dimensions |
Built to custom dimensions |
|
Trolley Structure |
Engineered around workpiece dimensions and payload |
|
Control System |
PID controller, touch screen and data logger optional |
|
Power Supply |
Matched to local voltage and frequency: 220V/380V/415V, 50Hz/60Hz |
|
Insulation Material |
High-density aluminium silicate rock wool |
|
Inner Shell Material |
SUS304 stainless steel; Carbon steel paint finish optional |
|
Outer Shell Material |
Carbon steel with anti-rust coating |
Custom Trolley Oven Solutions
Chamber Size Customization: Width, depth and height adjusted for part size, packing quantity and available floor space.
Trolley Structure Customization: Platform layout, support framing and wheel assembly designed for part shape, weight distribution and handling routine. Multi-layer fixtures, perforated trays and positioning blocks can be added.
Heating Capacity Customization: Heater package sized from chamber volume, target temperature, material thermal mass and batch cycle.
Air Circulation Customization: Natural convection or ducted forced circulation selected for drying or curing process. Horizontal / vertical airflow design optional.
Door and Access Customization: Door opening size, swing direction and seal design matched to trolley travel path and workshop layout. Single door, double door and lifting door options.
Electrical Configuration Customization: Components, voltage, phase and control logic configured for site power infrastructure. CE compliant electrical package available for export orders.
Engineering Considerations for Trolley Oven Design
Mechanical Loading Design: Trolley frame strength, load spread, support points and wheel loading calculated for the maximum batch payload.
Chamber Insulation: Insulation grade and thickness selected for operating temperature, heat loss control and outer surface safety. Outer surface temperature ≤ 45°C under normal operation.
Airflow Arrangement: Fan placement, duct routing and air return paths planned around chamber geometry and part stacking layout to minimise temperature deviation.
Door and Sealing Design: Door rigidity, high-temperature silicone gasket material and compression structure sized for peak operating temperature and trolley access.
Electrical Configuration: Heating components, protection circuits and control hardware selected to match equipment specification and regional electrical standards such as CE.
Manufacturing Quality and Testing
Nanjing Ranran Tiancheng Drying Equipment Co., Ltd. manufactures industrial ovens strictly against confirmed technical specifications. Inspection covers chamber structure, trolley components, heating elements, temperature controls, circulation assemblies and electrical systems. Our production follows ISO 9001 quality management system, with IQC, IPQC and OQC full-process inspection.
Equipment Inspection and Acceptance
|
Inspection Item |
Verification Purpose |
|
Chamber Dimensions |
Confirm internal geometry matches drawing |
|
Trolley Operation |
Verify smooth travel, load stability and alignment |
|
Heating System |
Validate element energisation and ramp performance |
|
Temperature Control |
Confirm sensor reading accuracy and setpoint stability |
|
Air Circulation |
Check fan rotation, airflow balance and duct integrity |
|
Electrical System |
Complete wiring continuity, insulation and safety interlock test |
|
Temperature Testing |
Run uniformity soak test under agreed load conditions and issue test report |
Documentation and Technical Support
Project documentation can be confirmed according to the order requirements and may include: Equipment technical specifications; Electrical drawings; Operation and maintenance instructions; Inspection records; Temperature uniformity test report; CE certificate (upon request); Other agreed technical documents.
Ordering and Delivery Information
We support industrial buyers, distributors, trading companies and engineering contractors for equipment selection, customization and export.
Step 1: Submit Your Requirements
Share workpiece dimensions, batch weight, target temperature and production capacity for initial evaluation.
Step 2: Technical Evaluation and Quotation
We assess chamber layout, trolley structure, heating power, airflow and electrical setup, then issue a formal quotation with technical proposal.
Step 3: Technical Confirmation and Order Placement
Production starts once configuration, commercial terms and delivery schedule are mutually confirmed.
Step 4: Manufacturing and Production Updates
Fabrication follows approved drawings; we share photos and video progress updates during production.
Step 5: Inspection and Shipment
Pre-delivery inspection, export fumigation packing and shipping are arranged. Incoterms such as FOB, CIF, DAP are agreed per contract.
Installation and Operating Requirements
We review site constraints before finalising design, especially for large trolley ovens: Clear floor footprint; Floor load bearing capacity; Trolley travel clearance and access route; Available power supply rating; Exhaust and fume extraction provisions; Loading/unloading aisle space; Service access for maintenance. For oversized units, workshop layout and material handling workflow are reviewed together with chamber drawings.
We can provide installation guidance manual and remote video support. On-site installation service is available as an optional chargeable item.
Maintenance and Spare Parts Support
Standard service checks cover: Heating element condition and terminal connections; Circulation fan bearing and running noise; Trolley wheels, rails and guide components; Door gasket integrity and chamber heat leakage; Internal chamber and duct cleaning; Temperature sensor calibration and controller function.
Spare parts lists and lead times can be shared at quotation stage. O&M manuals are supplied with shipment. Common consumables (heater elements, gaskets, sensors) are kept in stock for fast re-supply.
Purchasing Information
Minimum Order Quantity (MOQ)
MOQ is confirmed according to the selected model and customization level. Standard model MOQ: 1 unit. Contact us for project-specific information.
Production Lead Time
Standard models: 15–20 working days. Custom large-size trolley ovens: 25–40 working days. Lead time depends on chamber size, heating configuration, trolley structure and order quantity, confirmed after specs finalised.
Sample or Testing Requirements
Material testing can be arranged upon discussion, subject to sample availability and process feasibility. Customers can send samples to our test lab for free drying/curing trial and obtain test data.
Payment Terms
Payment arrangements are discussed and confirmed in the commercial contract. Normally 30% deposit, balance before shipment.
Export Packaging and Shipping
Export fumigated wooden case packaging and global shipping coordination are available under agreed trade terms.
Warranty and After-Sales Support
One-year equipment warranty under agreed contract terms (excluding wearing parts such as gaskets, heating tubes and sensors). Technical consultation, troubleshooting and spare parts support are provided long-term.
Global Supply
We export to Singapore, the United States, Canada, Thailand, Ukraine, Malaysia, Indonesia, Vietnam and other markets.
Frequently Asked Questions
Q: Can I request a sample or test run before placing an order?
A: Yes. We provide free material testing service. Testing arrangements can be discussed according to your material characteristics and processing requirements. Share sample information and test targets for feasibility review. You may send samples to our factory lab.
Q: Can you customize the voltage and frequency for overseas customers?
A: Yes. Electrical packages are matched to local power supply, supporting 220V/380V/415V, 50Hz/60Hz, single-phase or three-phase. CE electrical compliance package can be supplied for European customers. Provide voltage, frequency and phase before quotation.
Q: What warranty do you provide?
A: We provide a one-year equipment warranty under the agreed warranty terms. Consumable parts including heating elements, silicone gaskets and temperature sensors are excluded from warranty. Please refer to the sales contract for the full warranty scope and conditions.
Hot Tags: electric trolley oven, China electric trolley oven manufacturers, suppliers, factory, Desktop blast drying oven, Electric Motor Drying Oven, Explosion proof Oven, industrial vacuum drying oven, Motorized Rotary Oven, Transformer Curing Oven


